OSHA Edge Guarding: How to Prevent Falls in Construction
Do you know everything you need to know about the most frequently cited Occupational Safety and Health Administration standards? In this series, we’re exploring the most common OSHA violations, one by one. Keep reading to learn how to avoid an OSHA edge guarding violation and protect your workforce from falling risks.
Number one isn’t always a good thing. For many years now, fall protection is consistently the most frequently cited OSHA violation. And edge guarding plays into that number significantly.
OSHA’s Edge Guarding Standard: What It Is
OSHA definition:
OSHA’s regulation (29 CFR 1926.501) that covers unprotected sides and edges states that “Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.”
Simple definition:
When workers are performing work at heights of 6 feet or more near openings or edges they must be protected from falling.
How to protect workers at heights?
OSHA defines fall protection as “any equipment, device, or system that prevents a worker from falling from an elevation or mitigates the effect of such a fall.” Employers may choose from the following fall protection options:
Why Edge Guarding Violations Happen
Edge guarding violations are very common because construction workers are frequently exposed to fall hazards when working on rooftops, openings on sides of buildings, scaffolding and other heights. According to the Bureau of Labor Statistics (BLS), of the 5,333 worker deaths in 2019, 880 were the result of a slip, trip and fall accident. Falls are the number one cause of deaths in the construction industry.
What You Stand to Lose When Fall Protection Violations Happen
Direct costs:
OSHA penalties can exceed $16,550 per violation—and as much per day for every day the issue hasn’t been fixed by OSHA’s deadline. The fine for a willful or repeated violation can be 10 times as much.
Indirect costs:
Signs You’re at Risk of an Edge Guarding Violation
Working at heights is extremely common in the construction industry. Anytime a worker is working at 6 feet or more near unprotected openings and edges there is a risk of falling. And the farther the fall, the more dangerous the outcome.
Every worker who works at heights needs to understand the risks of a fall and what measures must be put into place to prevent them from falling. Training should be conducted annually.
How to Avoid an Edge Guarding Violation: Your Prevention Checklist
Personal Fall Arrest Systems
Guardrail Systems
You Don’t Have to Manage Your OSHA Requirements Alone
Have questions? Looking for more detailed OSHA compliance guidance? Novara is here to help.
To truly protect your workforce and bottom line, you’ll need in-depth information—and not just about OSHA’s top 10, but every potential hazard that exists in your organization. You’ll also need to conduct a thorough evaluation of your facilities to identify current gaps and risk areas.
Novara’s combination of software, training, and AI-powered tools put people and safety first while protecting critical operations. Request a demo to see how the platform can work for you.
